S-tines
Uniformity guarateed by the pre-tension
•Special, high elasticity steels with high capacity to recover initial geometry.
•Specific integral heat treatment that provides each material with optimum characteristics.
•Pre-tensioned: eliminates the first deformations to maintain the shape and be able to provide a consistent job.
•Powder painted with UVA protection.
Use:•Working in dry (friable) soil is recommended and they are very suitable for seedbed preparation in demanding crops (for example, beetroot).
•A working depth of from 2 to 8 cm is recommended.
•The required power is between 18 to 22 hp/m.
•Working speed should be kept between 6.0 to 8.0 km/h.
•The frame clearance is 40 to 50 cm.
Pre-tensioned: eliminates the first deformations to maintain the shape and be able to provide a consistent job.
2470
2474
Ref. | O. Ref. | G | A | B | C | D | M | Grs. | B | D | S |
2470 | 32x10 | 344 | 490 | 228 | 13 | M10 | 2700 | 288 | 2474-1 | ||
2470-EL | 101000637 | 32x10,5 | 351 | 505 | 223 | 13 | M10 | 2850 | 288 | 100 |
2470-EL: Elliptical profile
Clamps,
Fits with 1505 / 1543 / 1544 / 1545 / 1548 / 1552
15001 / 15054
2471
2474
Ref. | G | A | B | C | D | E | F | M | Grs. | B | D | S |
2471 | 32x10 | 344 | 490 | 228 | 13 | 395 | 541 | M10 | 2980 | 250 | 100 | 2474-1 |
Clamps,
2471= 2470 + 1543
2473
Ref. | O. Ref. | G | A | B | C | D | E | F | M | Grs. | B | D |
2473 | 32x10 | 237 | 340 | 196 | 14 | M12 | 1715 | 400 |
Fits with 1583 / 1594
Clamps,
2474
Ref. | G | A | B | C | D | Grs. | B | D | S |
2474-1 | 32x10 | 201 | 122 | 13x20 | 1350 | 500 | 2470-2472 | ||
2474-2 | 45x10 | 229 | 127 | 13x20 | 2550 | 300 | 2476-2476C2A | ||
2474-2 A14 | 45x10 | 229 | 127 | 15x18 | 2550 | 300 | 2476A14C2A |
2471-1 for 2470-2472 (max. chassis 50x50)
2474-2 and 2474-2 A14 for 2476 (max. chassis 60x60)
2528-1
Ref. | G | A | B | C | D | E | F | M | Grs. | B | D |
2528-1 | 32x12 | 340 | 495 | 264 | 15 | 365 | 532 | M10 | 3710 | 250 | 100 |
2528-1: 2528 + 1543.
Clamps,
2474
2472
Ref. | G | A | B | C | D | M | Grs. | B | S |
2472 | 32x12 | 344 | 490 | 230 | 13 | M10 | 3210 | 288 | 2474-1 |
2472 C2A | 32x12 | 354 | 500 | 230 | 13 | M10 | 3210 | 288 | 2474-1 |
Clamps,
2472 fits with 1505 / 1543 / 1544 / 1552 / 15001 / 15054 CA
2472 C2A fits with 15054 CA3 / 15098
2463
Ref. | G | A | B | C | D | E | F | M | Grs. | B | D | S |
2463 | 40x10 | 344 | 490 | 228 | 13 | M10 | 3410 | 288 | 100 | |||
2463-1 | 40x10 | 344 | 490 | 228 | 13 | 396 | 541 | M10 | 3790 | 288 | 100 |
2463-1: 2463 + 1543.
2506
2506-R
Ref. | G | A | B | C | D | M | Grs. | B | D | S |
2506-C2A | 45x10 | 364 | 522 | 243 | 14 | M10 | 4205 | 200 | 100 | 2506-R |
Fits with 15099.
2506-R
Ref. | b | G | M. | A | B | C | Grs. | B | D |
2506-R | 45x10 | 45x10 | 40x40 | 213 | 132,5 | 14 | 2422 | 204 |
Helper spring for 2506
2509
Ref. | G | A | B | C | D | M | Grs. | B | D | S |
2509 | 45x10 | 387 | 533 | 234 | 13 | M12 | 3330 | 300 | 100 |
2517
2517
Ref. | G | A | B | C | D | M | Grs. | B | D |
2517 | 45x10 | 318 | 458 | 241 | 13 | M10 | 3600 | 240 | 100 |
Fits with 1505.
2476
2474
Ref. | G | A | B | C | D | M | Grs. | B | D | S |
2476 C2A A10 | 45x12 | 469 | 622 | 267 | 13 | M10 | 5195 | 160 | 100 | 2474-2 |
2476 | 45x12 | 456 | 609 | 267 | 13 | M12 | 5130 | 160 | 2474-2 | |
2476 C2A | 45x12 | 469 | 622 | 267 | 13 | M12 | 5130 | 160 | 2474-2 | |
2476 C3A | 45x12 | 469 | 622 | 267 | 13 | M12 | 5130 | 160 | 2474-2 | |
2476 A14 C2A | 45x12 | 469 | 622 | 267 | 15 | M12 | 5130 | 160 | 2474-2-A14 |
Clamps,
2476 fits with 1504 / 1505 / 15000
2476 C2A A10 fits with 1529 / 1530 M10 / 1535 S CN CA1 / 1547 SC2A/CP / 1553 S C2A / 15035 / 15045
2476 C2A / A14 C2A fits with 1502 / 1503 / 1530 M12 / 1535 S CN / 1547 S C2A M12 / 1553 S C2A M12 / 1599 S CN / 15035 S CP CA1 / 15037 CA1. See ASSEMBLY OF S-TINES - CULTIVATORS
2476 fits with 15098.
2479 C3A ST
Ref. | G | A | B | C | D | E | F | M | Grs. | B | D | d |
2479-C3A-ST | 45x12 | 469 | 622 | 267 | 15 | M10 | 5200 | 160 | 30mm |
Fits with 15054 CA3 / 15098
2501
Ref. | G | A | B | C | D | M | Grs. | B | D | S |
2501 | 45X12 | 344 | 490 | 230 | 13 | M10 | 4640 | 200 | 100 |
Clamps,
2511
Ref. | G | A | B | C | D | M | Grs. | B | D | S |
2511 | 45x12 | 350 | 498 | 235 | 13 | M12 | 3990 | 288 | 100 |
Clamps,
Fits with 15044.
2488
2488R
Ref. | G | A | B | C | D | M | Grs. | B | D | S |
2488-C2A | 65x12 | 466 | 619 | 268 | 13 | M12 | 7720 | 120 | 2488R | |
2488-B | 65x12 | 456 | 609 | 268 | 13 | M12 | 7600 | 120 | 100 | 2488R |
2488-B C2A | 65x12 | 469 | 622 | 268 | 13 | M12 | 7600 | 120 | 100 | 2488R |
2488-B-A14 C2A | 65x12 | 469 | 622 | 268 | 15 | M12 | 7600 | 120 | 100 | 2488R |
Clamps. See Clamps for S-Tines
Concave head.
See possible assemblies on page See ASSEMBLY OF S-TINES - CULTIVATORS
2488R
Ref. | G | b | M. | A | B | C | Grs. | B | D |
2488-R | 65x12 | 65x10 | 60x60 | 217 | 223 | 15x25 | 3400 | 204 |
Helper spring for 2488
2489
2489R
Ref. | G | A | B | C | D | E | F | M | Grs. | B | D | S |
2489 C2A+15035 CA | 70x12 | 576 | 667 | 292 | 15 | 576 | 738 | M10 | 9950 | 90 | 100 | 2489R |
2489 C2A A12 | 70x12 | 505 | 667 | 292 | 15 | M12 | 8700 | 90 | 2489R |
Clamps. See Clamps for S-Tines
Concave head.
2489 C2A fits with 1529 / 1530 M10 / 1535 S CN CA1 / 15035 / 15038 / 15045
2489 C2A A12 fits with 1530 M12 / 1535 S CN / 1599 S CN / 15035 CP CA1
2546
2546R
Ref. | G | A | B | C | D | M | Grs. | B | D | S |
2546 C2A | 80x12 | 576 | 757 | 323 | 17 | M12 | 8950 | 90 | 100 | 2546R |
Fits with 1535 S CN with KIT2546C2A bolt.
Clamps.