Longer lasting 1512 , 1513 & 1599
Which guarantees the working width and the angle of attack
Bellota has redesigned the new cultivators 1512 , 1513 and 1599 so that they last longer. Firstly, the sweeps have been reshaped so that the working width is maintained as they wear away with use. The wing of the cultivator, which is more than 40 mm, guarantees that the piece will always have the same working width for homogenous tilling in the fields.
The two sides reinforced, with a point more than 22 mm thick and 85 mm long, not only guarantees that the piece lasts longer, but also that the angle of attack is maintained so that the point of the cultivator can always penetrate the soil properly, thus minimum effort is required to till the land.
There are three models: 1512 and 1599 with 47º angle of attack and 1513 with 35,5º angle of attack. These cultivators have a working width of 185, 230 or 270 mm.
1512 A C2N
1512 A C2N
1512 A CN
1512 A CN
1512 A C2N CP
Ref. | C | Grs. | A | B | C | D | A | B | E | M | D |
1512-A CN CG | 6 | 1750 | 270 | 195 | 45 | 112 | 500 | 1199A | M12 | ||
1512-A C2N CG | 7 | 2000 | 270 | 195 | 45 | 112 | 500 | 1199A | M12 | ||
1512-A7 C2N CG | 7 | 1580 | 185 | 195 | 45 | 112 | 500 | 1199A | M12 | 100 | |
1512-A9 C2N CG | 7 | 1800 | 230 | 195 | 45 | 112 | 500 | 1199A | M12 | 100 |
1512-A-C2N CG / 1512-A-7-C2N CG / 1512-A-9-C2N CG / 1512 A C2N CP: painted in blue epoxy painting.
1512 A C2N CP: 13 tungsten carbide plates and reinforced neck
1513-A-CN
1513 A CN
1513 A C2N
1513 A C2N
1513-A C2N CP
Ref. | C | Grs. | A | B | C | D | A | B | E | M |
1513-A9 CN | 6 | 1550 | 230 | 210 | 45 | 100 | 500 | 1199A | M12 | |
1513-A CN 6 CG | 6 | 1750 | 270 | 210 | 45 | 100 | 500 | 1199A | M12 | |
1513-A CN 8 CG | 8 | 2150 | 270 | 210 | 45 | 100 | 500 | 1199A | M12 | |
1513-A C2N CG | 7 | 2000 | 270 | 210 | 45 | 100 | 500 | 1199A | M12 |
1513-A-CN8 CG / 1513-A-C2N CG / 1513 A C2N CP: painted in blue epoxy painting.
1513 A C2N CP: 13 tungsten carbide plates and reinforced neck