Chisel tines
High elasticity and recovery of the initial geometry
Characteristics:
•Special, high elasticity steel with high capacity to recover initial geometry.
•Specific integral heat treatment that provides each material with optimum characteristics.
Use:•Working in dry soil is recommended.
•A working depth of from 18-22 cm is recommended.
•The recommended power is between 25 and 40 hp per metre of working width.
•Working speed should be high (7 to 9 km/h) to improve efficiency.
2461-2467
D Right
D Articles manufactured upon order
2465
D Articles manufactured upon order
2467V
I Left
D Right
D Articles manufactured upon order
2811
D Articles manufactured upon order
2461 - 2467
Ref. | G | A | B | C | D | E | F | Grs. | B | D |
2461-B | 45x20 | 500 | 355 | 17 | 40-50 | M12 | 296 | 5200 | 100 | |
2461-C | 40x30 | 495 | 368 | 18,5 | 40-50 | M12 | 296 | 6900 | 90 | |
2461-CL | 40x30 | 470 | 492 | 26 | 45 | M12 | 215 | 9620 | 70 | |
2461-D | 45x20 | 415 | 450 | 17 | 40-50 | M12 | 280 | 6200 | 100 | 100 |
2462-A | 50x25 | 450 | 582 | 21,5 | 40-50 | M12 | 280 | 10300 | 45 | |
2462-B | 50x30 | 455 | 587 | 21,5 | 40-50 | M12 | 280 | 12500 | 40 | |
2462-B-A16 | 50x30 | 545 | 660 | 17 | 56 | M12 | 330 | 14150 | 35 | 100 |
2462-B A24 CA2 | 50x30 | 455 | 587 | 26 | 45-57 | M12 | 280 | 12500 | 40 | 100 |
2462-C | 50x30 | 560 | 480 | 20 | 57 | M14 | 330 | 11700 | 80 | 100 |
2464-A | 40x40 | 470 | 500 | 26 | 45 | M12 | 245 | 11000 | 50 | |
2464-AL | 40x40 | 525 | 575 | 26 | 45 | M12 | 230 | 12700 | 30 | |
2464-AL CA1 | 40x40 | 525 | 575 | 26 | 57-57 | M12 | 230 | 12700 | 30 | 100 |
2466 | 25x25 | 393 | 370 | 17,5 | 45 | M12 | 217 | 3500 | 200 | |
2467 | 30x30 | 470 | 397 | 17 | 45 | M12 | 275 | 5500 | 125 | |
2467-35 | 35x35 | 470 | 402 | 17 | 45 | M12 | 275 | 7500 | 125 | |
2467-35 TL | 35x35 | 495 | 450 | 16,5 | 45 | M12 | 244 | 8000 | 125 |
D Articles manufactured upon order
2464-AL CA1: With three holes to mount Mulch-Mix cultivators.
TL: with lateral hole
2465
Ref. | G | A | B | C | D | E | F | Grs. | B | D |
2465 | 45x12 | 229 | 277 | 14 | 33-58 | M12 | 150 | 2120 | 500 | 100 |
3 holes
2467-V
Ref. | G | A | B | C | D | E | F | G | Grs. | B | D |
2467-V D | 30X30 | 470 | 395 | 17 | 45 | M12 | 305 | 200 | 5800 | 90 | |
2467-V I | 30X30 | 470 | 395 | 17 | 45 | M12 | 305 | 200 | 5800 | 90 | |
2467-35 V D TL | 35x35 | 495 | 450 | 16,5 | 45 | M12 | 244 | 200 | 9100 | 80 | 100 |
2467-35 V I TL | 35x35 | 495 | 450 | 16,5 | 45 | M12 | 244 | 200 | 9100 | 80 | 100 |
D Right
D Articles manufactured upon order
V: Models specially designed for vineyard
2467-35 V TL: with lateral hole
2811
2811 A
2811 B
Ref. | G | A | B | C | D | E | F | Grs. | B | D |
2811-A | 45X15 | 254 | 408 | 17 | 45 | M10 | 3800 | 120 | 100 | |
2811-B | 45X15 | 369 | 490 | 17 | 45 | M10 | 272 | 5300 | 120 | 100 |
2811-A installed with an inclination of 20º
2811-B: 2 mounting screw holes. 40 mm distance between holes of 17 diameter