Spiral track looseners
High elasticity and recovery of the initial geometry
To air the compact soil that has been pressed down by the weight of the tractor wheels, two spiral track looseners are usually fitted on the cultivators and these are normally double coil tines. The shape of the spiral track looseners is very different according to each model of cultivator. These spiral track looseners are fitted at the front of the cultivators and normally a small profile is used because not a lot of tillage is required.
2480 B
I Left
D Right
F Articles manufactured upon order
2480 TB
I Left
D Right
D Articles manufactured upon order
2480 G
I Left
D Right
D Articles manufactured upon order
2481 G
I Left
D Right
D Articles manufactured upon order
2481 N
D Right
D Articles manufactured upon order
2487
D Articles manufactured upon order
2485 N
I Left
D Right
D Articles manufactured upon order
2496
I Left
D Right
D Articles manufactured upon order
2499
I Left
D Right
D Articles manufactured upon order
2480-B
Ref. | G | A | B | C | E | G | F | M | Grs. | B |
2480-B D | 20x20 | 132 | 713 | 115 | 45 | 64 | 300 | M10 | 5000 | 125 |
2480-B I | 20x20 | 132 | 713 | 115 | 45 | 64 | 300 | M10 | 5000 | 125 |
D Right
F Articles manufactured upon order
2480 TB
2480-TB
Ref. | G | A | B | C | D | G | F | M | Grs. | B | D |
2480-TB-D | 20X20 | 71 | 548 | 92 | 6 | 63 | 400 | M12 | 3800 | 200 | 50 |
2480-TB-I | 20X20 | 71 | 548 | 92 | 6 | 63 | 400 | M12 | 3800 | 200 | 50 |
D Right
D Articles manufactured upon order
2480 G
2480-G
Ref. | G | A | B | C | D | E | G | F | M | Grs. | B | D |
2480-G D | 20x20 | 26 | 690 | 90 | 7 | 45 | 64 | 345 | M12 | 4300 | 125 | 50 |
2480-G I | 20x20 | 26 | 690 | 90 | 7 | 45 | 64 | 345 | M12 | 4300 | 125 | 50 |
D Right
D Articles manufactured upon order
2481 G
2481-G
Ref. | G | A | B | C | D | E | G | F | M | Grs. | B | D |
2481-G D | 25x25 | 252 | 703 | 121 | 17 | 60 | 94 | 277 | M12 | 8000 | 100 | 50 |
2481-G I | 25x25 | 252 | 703 | 121 | 17 | 60 | 94 | 277 | M12 | 8000 | 100 | 50 |
D Right
D Articles manufactured upon order
2481 N
2481-N
Ref. | G | A | B | C | D | E | G | F | M | Grs. | B | D |
2481-N-D | 1" X 1" | 118 | 935 | 150 | 10 | 44,5-57 | 80 | 483 | M12 | 9900 | 50 | 50 |
D Articles manufactured upon order
2487
2487
Ref. | G | A | B | C | D | E | G | F | M | Grs. | B | D |
2487 | 30X30 | 44 | 334 | 120 | 13 | 35 | 79 | 200 | M12 | 8510 | 100 | 50 |
2485 N
2485-N
Ref. | G | A | B | C | D | E | G | F | M | Grs. | B | D |
2485-N-D | 32X32 | 125 | 925 | 150 | 10 | 44,5-57 | 102 | 483 | M12 | 12000 | 40 | 50 |
2485-N-I | 32x32 | 125 | 925 | 150 | 10 | 44,5-57 | 102 | 483 | M12 | 12000 | 40 | 50 |
D Right
D Articles manufactured upon order
2496
2496
Ref. | G | A | B | C | D | G | F | M | Grs. | B | D |
2496 D | 20X20 | 99 | 528 | 90 | 6 | 65 | 330 | M8 | 4025 | 200 | 50 |
2496 I | 20X20 | 99 | 528 | 90 | 6 | 65 | 330 | M8 | 4025 | 200 | 50 |
D Right
D Articles manufactured upon order
2499
2499
Ref. | G | A | B | C | D | E | G | F | M | Grs. | B | D |
2499 D | 25x25 | 20 | 660 | 90 | 6 | 80 | 325 | M12 | 6800 | 150 | 50 | |
2499 I | 25x25 | 20 | 660 | 90 | 6 | 80 | 325 | M12 | 6800 | 150 | 50 | |
2499 D C2A | 25x25 | 20 | 660 | 90 | 6 | 45 | 80 | 325 | M10 | 6800 | 150 | 50 |
2499 I C2A | 25x25 | 20 | 660 | 90 | 6 | 45 | 80 | 325 | M10 | 6800 | 150 | 50 |
D Right
D Articles manufactured upon order
2499 D/I C2A fits with 1529-A6.