Double coil tines

High elasticity and recovery of the initial geometry

Characteristics:

•Special, high elasticity steel with high capacity to recover initial geometry.

•Specific integral heat treatment.

•Epoxy paint with UVA protection.

Use:

•Working in dry (friable) soil is recommended and they are very suitable for seedbed preparation in non-demanding crops (for example, barley and wheat etc).

•A maximum working depth of between 15 and 25 cm is recommended

•The required power is between 19 and 23 hp/m

Epoxy paint with UVA protection.

2483

Download catalogue

20X20

2480

2480V - 2485V

Ref.	G	A	B	C	D	E	G	M	Grs.	B	F	D
2480 D	20x20	370	395	92	13	45	63	M10	4400	200	12480
2480 I	20x20	370	395	92	13	45	63	M10	4400	200	12480
2480-A 14 D	20x20	370	395	92	15	45	63	M10	4400	200	12480-5050A	100
2480-A 14 I	20x20	370	395	92	15	45	63	M10	4400	200	12480-5050A	100
2492-D	20X20	277	384	96	15	45	60	M12	4400	200	12480	100
2492-I	20X20	277	384	96	15	45	60	M12	4400	200	12480	100

I Left
D Right
D Articles manufactured upon order

Clamps. See 12480 - 12486

See possible assemblies on page See ASSEMBLY DOUBLE COIL TINE - CULTIVATOR

Models specially designed for vineyard

25X25

2481-H

2481-FM

2480V - 2485V

Ref.	G	A	B	C	D	E	G	M	Grs.	B	F	D
2481-C-D-CA10	25x25	400	450	120	13	45	80	M10	8600	60	12481	100
2481-C-I-CA10	25x25	400	450	120	13	45	80	M10	8600	60	12481	100
2481 D	25x25	425	468	120	15	45	79	M12	8950	95	12481
2481 I	25x25	425	468	120	15	45	79	M12	8950	95	12481
2481-D-CA1	25x25	425	468	120	15	45	79	M10	8950	95	12481	100
2481-I-CA1	25x25	425	468	120	15	45	79	M10	8950	95	12481	100
2481-B D	25x25	390	468	120	17	60	79	M12	8950	100	12481	100
2481-B I	25x25	390	468	120	17	60	79	M12	8950	100	12481	100
2481-H D	25x25	450	395	118	17	33	80	M10	9000	90	12481	100
2481-H I	25x25	450	395	118	17	33	80	M10	9000	90	12481	100
2481-FM D	25X25	90	530	130		45/51	95	M12	10000	100	12481	100
2481-FM I	25X25	90	530	130		45/51	95	M12	10000	100	12481	100
2481-RM D	25X25	700	530	130		51	80	M12	10700	100		100
2481-RM I	25X25	700	530	130		51	80	M12	10700	100		100

I Left
D Right
D Articles manufactured upon order

Clamps. See 12480 - 12486

See possible assemblies on page See ASSEMBLY DOUBLE COIL TINE - CULTIVATOR

2499 D/I C2A fits with 1529-A6 See 1529

Models specially designed for vineyard

27X27

2483

2480V - 2485V

Ref.	G	A	B	C	D	E	G	M	Grs.	B	F
2483 D	27x27	437	480	127	17	45	85	M12	10500	80	12483
2483 I	27x27	437	480	127	17	45	85	M12	10500	80	12483
2483-R22 D	27x27	437	480	127	23	45	85	M12	10500	80	12483 A22
2483-R22 I	27x27	437	480	127	23	45	85	M12	10500	80	12483 A22

I Left
D Right
F Articles manufactured upon order

Clamps. See 12480 - 12486

See possible assemblies on page See ASSEMBLY DOUBLE COIL TINE - CULTIVATOR

Models specially designed for vineyard

30X30

2484

2484 GD

Ref.	G	A	B	C	D	E	G	M	Grs.	B	D
2484 D	30x30	496	498	145	21	45	95	M12	14200	60
2484 I	30x30	496	498	145	21	45	95	M12	14200	60
2484 D GD	30x30	360	625	360	15	45	95	M12	15000	60	100
2484 I GD	30x30	360	625	360	15	45	95	M12	15000	60	100

I Left
D Right
D Articles manufactured upon order

Clamps. See 12480 - 12486

2484 GD: water based painting

See possible assemblies on page See ASSEMBLY DOUBLE COIL TINE - CULTIVATOR

32X32

2485

2480V - 2485V

Ref.	G	A	B	C	D	E	G	M	Grs.	B	F
2485 D	32x32	438	508	155	23	45	101	M12	17000	50	12485
2485 I	32x32	438	508	155	23	45	101	M12	17000	50	12485

I Left
D Right
F Articles manufactured upon order

Clamps. See 12480 - 12486

See possible assemblies on page See ASSEMBLY DOUBLE COIL TINE - CULTIVATOR

Models specially designed for vineyard

35X35

2486-GD

Ref.	G	A	B	C	D	E	G	M	Grs.	B	F	D
2486 D GD	35x35	400	583	145	23	45/70	110	M12	22000	40	12486
2486 I GD	35x35	400	583	145	23	45/70	110	M12	22000	40	12486
2486 CD GD	35x35	410	600	145	17	50/75	110	M12	22000	40	12486	100
2486 CI GD	35x35	410	600	145	17	50/75	110	M12	22000	40	12486	100

I Left
D Right
D Articles manufactured upon order

Clamps. See 12480 - 12486

2486 C GD: water based painting

See possible assemblies on page See ASSEMBLY DOUBLE COIL TINE - CULTIVATOR

For vineyard

2480V - 2485V

Ref.	G	A	B	C	D	E	G	Grs.	B	M	F
2480-V D	20x20	380	395	92	13	45	160	4750	150	M10	12480
2480-V I	20x20	380	395	92	13	45	160	4750	150	M10	12480
2481-V D	25x25	445	480	127	15	45	310	9400	50	M12	12481
2481-V I	25x25	445	480	127	15	45	310	9400	50	M12	12481
2483-V D	27x27	445	480	127	17	45	285	11000	50	M12	12483
2483-V I	27x27	445	480	127	17	45	285	11000	50	M12	12483
2485-V D	32x32	438	508	155	23	45	335	18000	30	M12	12485
2485-V I	32x32	438	508	155	23	45	335	18000	30	M12	12485