Stubble tines
High elasticity and recovery of the initial geometry
Characteristics:
•Special boron steel.
•Integral heat treatment
Use:•Used for loosening the land, cutting and mixing the stubbles with the land.
•Working depth: 12-20 cm.
Integral heat treatment
2441
D Articles manufactured upon order
Hole pattern to fix the frame 2443
D Articles manufactured upon order
Hole pattern to fix the frame 2447
D Articles manufactured upon order
2444
D Articles manufactured upon order
Hole pattern to fix the frame 2446
D Articles manufactured upon order
Hole pattern to fix the frame 2823
F Articles manufactured upon order
2441
Ref. | G | A | B | C | M | Grs. | B | D |
2441-CA2 | 60x25 | 812 | 83 | 45/80 | M12 | 9100 | 100 | 50 |
Fits with 1509 / 1510
2443
Ref. | G | A | B | C | M | Grs. | B | D |
2443 CA1 | 60x25 | 847 | 325 | 70 | M12 | 10100 | 100 | 50 |
Fits with 1509 / 1510 .
2447
Ref. | G | A | B | C | M | Grs. | B | D |
2447 | 45x15 | 467 | 45 | 45 | M10 | 2650 | 350 | 100 |
Use screw kit 1199Kit2447 to assemble with 15052.
2444
Ref. | G | A | B | C | M | Grs. | B | D |
2444-865 A12 CA2 | 60x25 | 841 | 140 | 70 | M12 | 9800 | 100 | 50 |
2444-865 A14 CA1 | 60x25 | 841 | 140 | 70 | M14 | 9800 | 100 | 50 |
2444-865 A14 CA2 | 60x25 | 841 | 140 | 70 | M14 | 9800 | 100 | 50 |
2444-865 A14 CA3 | 60x25 | 841 | 140 | 70 | M14 | 9800 | 100 | 50 |
2444 A12 fits with 1586-A 8 CA / 1587-A 10 CA / 1588 10 CA.
2444 A14 fits with 1586-A 8 CA1 / 1587-A 10 CA1 / 1588 10 CA1 .
2446-A12
Ref. | O. Ref. | G | A | B | C | M | Grs. | B | D |
2446 A12 CA | 4653680 | 70x22 | 875 | 90 | 45 | M12 | 9800 | 100 |
Fits with Lemkem Smarag.
2823
Ref. | O. Ref. | G | A | B | C | M | Grs. | B |
2823-A | 34060834 | 50x25 | 469 | 445 | 57-57 | M12 | 7700 | 100 |
2823-B | 34060835 | 60x25 | 622 | 483 | 57-57 | M12 | 11100 | 70 |
2823-C | 34060836 | 60x25 | 720 | 500 | 57-57 | M12 | 12200 | 65 |
Fits with 15055 - 15056 - 15057 - 15058. and